Classic Series Gates

After the drawing is approved it usually takes 30 days or less.

On site installation takes about 2-4 business days depending, whether or not, it’s a single or double gate and the number of accessories.

Most gates we use a 5" square-tubing post with 1/4" wall thickness to hang the gate. It is set in concrete, at least 4′ deep. 12 foot gates we use 4" square-tubing, 3/16" wall thickness.

Our frames are made from 1-1/2"square tubing or 2" that’s 14ga, with 3/4"square tubing for our pickets. All letters are cut out of 1/8" thick material.

Cash, Check, Master Card, Visa, AMEX and Discover Card

50% non-refundable deposit to get started and the balance at completion. Anything under $600 we require total payment up front. With more complicated installs we may do a 50% down, 40% when the gate is installed and 10% at completion.